Metal Sticker
Metal Sticker
  • Overview
  • Spec
  • Photo&Video
  • Manufacture
  • FAQ

Metal Stickers are based on nickel (Ni) as the main substrate, with special platings (chrome, 24k real gold, etc.) attached to the surface. According to the requirements of the artwork provided by the customer, special processing methods such as exposure and electroforming are added, so that while obtaining a metallic texture, it also has a high reflective gloss effect, and finally undergoes precision brushing and packaging processing. 

Application field: 

This product is mainly used in the production of the following cards: financial bank cards, high-end membership cards or gift cards, etc. 

Reliability test: 

The high hardness physical properties of Metal Sticker products and the reliability of glue can be well adapted to the production process and card performance requirements of financial cards. The card fully complies with ISO/IEC7810, ISO/IEC7811, ISO/IEC7813, and CQM-related reliability tests for card bases. 

Physical Size Specification Limitations: 

 1.Metal Sticker thickness (without glue) range: 0.03-0.06 mm 

 2.Metal Sticker thickness (with glue) range: 0.035-0.08 mm 

 3.Double-sided tape type Metal Sticker thickness (with glue) range: 0.08-0.13 mm 

 4.Smallest wire diameter size: 0.12 mm 

 5.Smallest font size: 0.6 mm 

Product Categories: 

Regular color, colorful, textured surface, holographic, layered, relief, glitter powder metal sticker.

Main glue (back) type: 

Water glue: Printing glue. The advantages are low cost, easy processing, and high yield of qualified products. The disadvantages are that protective film of this kind of product is highly viscous, difficult to tear and paste, and the efficiency is low. When tearing the film, it is easy to cause product displacement or defect. After the card body is laminated, the glue solvent evaporates, which is easy to cause problems such as glue overflow and air spots. 

Hot-melt adhesive: Heat-setting printing glue. The advantage is that the protective film of this kind of product and the initial viscosity of the product are low, it is easy to tear and stick and it is convenient for automatic operation, the glue has high chemical stability, and after the card body is laminated, there will be no glue overflow, air spots and other issues. The disadvantages are that the cost of such products is high,and the scrap rate is high. 

3M double-sided tape: Sticky solid tape. This type of tape is used for surfaceattached(milling slot mount) Metal Sticker without lamination process, such as perfume metal sticker, etc.

Textured Metal Sticker

Metal Sticker


Glossy Metal Sticker:The surface has a mirror effect and a high-gloss finish, its high metal texture can be used to replace various card logos or patterns. 

Matte Metal Sticker:The reflective effect is not strong, and it presents a fine and frosted texture. 

Frosted Metal Sticker:The frosted surface has an irregular light-absorbing effect. The commonly used sand are coarse sand, fine sand, pearl sand, etc. 

Stripe Metal Sticker:neatly arranged and evenly distributed stripe surface effect, commonly used stripe types are horizontal stripes, vertical stripes, oblique stripes, etc. 

Grid Metal Sticker:neatly arranged and evenly distributed dot surface effect. 

CD pattern Metal Sticker:also known as Fingerprint Metal Sticker, the surface presents the effect of fingerprint lines, and through reflection, it will show a gloss change similar to that of a CD.

Holographic Metal Sticker

Metal Sticker


Holographic Rainbow:The texture presents a mirror effect of rainbow refraction. 

Holographic Convex Mirror:The texture presents a matrix arrangement of convex circles, which not only highlights the natural color of the metal, but also has the refraction effect of a distorting mirror. 

Holographic CD Pattern: The texture presents a CD pattern with color shaking, producing different levels of color patterns.

Holographic Stars: The texture appears as twinkling stars of different sizes, just like the starry sky at night. 

Holographic Kaleidoscope: The texture is presented as a combination of colored squares of different sizes. 

Holographic Dot Scales: The texture presents the effect of scattered dots with irregular rainbow refraction.

Layered Metal Sticker

Metal Sticker

Layered Metal Sticker is to make several different layers of texture on one metal sticker. Different texture effects can be made on the same layer or at different layers. The surface of layered metal sticker is multi-layered, showing a raised effect, generally used as an external metal sticker. The surface of layered metal sticker can be matched with glossy texture, matte texture, frosted texture, stripe texture, grid texture, CD pattern texture to achieve the effect of multi-layered and multi-grained surface.

Holographic Relief Metal Sticker

Metal Sticker

Holographic Relief Metal Sticker has a strong 3D stereo effect, combining embossed and holographic effects, it has the illusion effect of Holographic Metal Sticker, with a strong sense of hierarchy and a strong sense of visual impact.

Light Movable Sticker

Metal Sticker

Light Movable Sticker is formed through the evolution of 3D printing technology. You can choose a variety of colors and textures for matching, retaining the three-dimensional, shaking, and flowing sense of three-dimensional printing. It can produce flowing highlights through changes in light and shadow angles. It can be mainly used in LOGO And above the small patterns, it will appear more vivid and colorful.

Glitter Powder Metal Sticker

Metal Sticker

Glitter Powder Metal Sticker presents a sparkling effect and has a good reflective effect. It is generally used in some parts of the product to achieve a good decorative effect.


Contact us

Products Recommended